Special Purpose Regulators

Airmatic Regulators are nothing but pressure reducing valves. In any application, it is highly essential that regulated force is used. Use of unregulated force is highly dangerous as well as it is shear waste of energy. For general applications of pressure control, standard regulators serve the purpose. However, special versions for precision regulation, high pressure etc. are also available.

Airmatic regulators have oversized orifice and balanced/unbalanced disc design to provide higher capacity as well as sensitivity. Due to proven design, Airmatic regulators have minimum effect on secondary pressure, even if inlet pressure fluctuate.

Please refer to graphs indicating 'Secondary Pressure vs Flow' charecteristics for particular model.

Special Purpose Regulators

 
 
High Capacity Series
 

HIGH CAPACITY SERIES :- A118-A119
PILOT REGULATOR :-A119 X 20
SERVICE : COMPRESSED AIR / GASES

Sizes: 65 mm & 80 mm (G2 1/2" & G3")
Flow: up to 800 SCFM @ 7 kg / cmg

Airmatic high capacity regulators are designed for the most rigorous general purpose applications. They meet flow requirements up to 800 scfm and easily accommodate supply pressure of 12Kg/cm reduced to 9Kg/cm. This performance results from extremely large orifice & flow ports, balance disc & efficient aspirator. Ideal for application in continuous service where pressure must be held accurately over a wide variation of flow. These regulator are adapted for control by a remote or distant located small pilot regulator.

  • Textile Machines
  • Glass Industries
 
Spec Sheet (PDF)  
IOM (PDF) Top
 
Precision Regulators
 

PRECISION SERIES- A 215 / A2216
SERVICE : COMPRESSED AIR, WATER AND GASES
Sizes: 6 mm & 10 mm (G 1/4" & G3/8")
Flow: up to 8 SCFM @ 7 kg / cmg

  • Air / Water pressure regulation fluidics devices
  • High Performance
  • Rugged Diaphragm Design
  • For Application requiring constant pressure with vide variation of flow
 
Spec Sheet (PDF)  
IOM (PDF) Top
 
High Pressure
 

HIGH PRESSURE SERIES - HPR
SERVICE - COMPRESSED AIR AND GASES
Sizes: 6 mm to 25 mm (G 1/4" to G1")
Flow: up to 400 SCFM @ 7 kg / cmg

Airmatic High Pressure regulators are designed for the most rigorous general purpose applications.Designed for Gas, Oil, Water and Air service. Having St. Steel body and Buna-N Diaphragm.

  • High Performance Blow Moulding / PET
  • Starting air for diesel engine
  • Airblast circuit breakers
  • N2, CO2 & other non toxic gases
  • Pharmaceutical esthetic applications
 
Spec Sheet (PDF)  
IOM (PDF) Top
 
Remote Control
 

REMOTE CONTROL SERIES:- A119x20
SERVICE : COMPRESSED AIR

Sizes: 6 mm to 50 mm (G 1/4" to G2")
Flow: up to 600 SCFM @ 7 kg / cmg


Airmatic popular high capacity series 119 relieving type regulator is adaptor for control by a remote or distant located small pilot regulator. Regulator is ruggedly constructed with extra large orifice and flow ports plus a balanced disc, for further description, see catalogue 012. Ideal for continuous high capacity requirements where reduced pressure must be held constant over wide variations in flow. Constant bleed device provides exceptionally fine set point adjustment.

  • Test Benches
  • Textile Machines
  • Glass Industries
 
Spec Sheet (PDF)  
IOM (PDF) Top
 
    Filters Regulators Lubricators
         
Home
Manu. Assembly & Testing
Research & Development
Our Custom-Built Software
Downloads
Network
News & Information
Enquiry
Contacts

Company